Pillar drill ADM40 BCS-1
We invite you to familiarize yourself with the offer for the new ADM 40BCS-1 pillar drilling machines, which are successfully used in machining plants and in the production of steel structures for unit, small-lot production in the mean of drilling, reaming, countersinking, threading in steel, cast iron, non-ferrous metals.
The advantage of the ADM 40BCS-1 pillar drilling machines is the ability to drill high elements after moving the table or headstock vertically and at an angle after turning the headstock. Headstock turning range: left 90 degrees, right 30 degrees.
This drill also has a smooth feed adjustment, which allows the selection of the spindle extension in the range from 0 to 100 mm/rev. during drilling. and the function of automatic rotation change after threading.
The basic technical parameters of the ADM 40BCS-1 drilling machine are in the table below:
| Technical parameters | ADM 40 BCS-1 |
| Max.drilling capacity iron/steel [mm] | 40/32 |
| Threading [mm] | M32/M24 |
| Pillar diameter [mm] | 115 |
| Collant pump motor [W] | 40 |
| Throat distance [mm] | 262 |
| Distance from spindle nose to worktable surface [mm] | 745 |
| Distance from spindle nose to base surface [mm] | 1245 |
| Spindle taper | MT4 |
| Spindle speeds range [steps][r/min.] | 50-1260 |
| Spindle feeds | 6 |
| Spindle travel [mm/r] | 0-110 mm/r |
| Working table dimensions [mm] | 540×470 |
| Table travel [mm] | 515 |
| Basement dimensions [mm] | 690×520 |
| Overall hight [mm] | 1810 |
| Main motor [kW] | 1,5 |
| Weight [kg] | 490 |
| STANDARD EQUIPMENT: |
| Coolant pump |
| Halogen lamp |
| Inverter |
| Drill chuck 3-16 |
| Arbor for drill chuck |
| Reducer sleeve 4/3 |
| Collets |
| Open ended spanner 22, 24 |